Compatible Devices
Actuators/Servos
Company | Comments |
---|---|
![]() |
I/O: PWM, RS485 full duplex and RS485 half duplex (reduced functions) Type: simplex, redundant and OPV To know how to integrate it with Veronte Autopilot 1x, read the Volz DA26 integration example |
![]() |
I/O: PWM, RS485 full duplex and CAN-BUS Type: simplex and redundant. To know how to integrate it with Veronte Autopilot 1x, read the Pegasus PA-R-135-4 integration example (CAN) or the Pegasus PA-R-135-4 integration example (Serial) |
![]() |
I/O: PWM and CAN-BUS Type: linear actuator and servo To know how to integrate it with Veronte Autopilot 1x, read the Ultra Motion integration example |
![]() |
I/O: PWM, RS232, RS485 and CAN-BUS |
![]() |
I/O: PWM, RS232, RS485 and CAN-BUS |
Other companies | ||
---|---|---|
![]() |
![]() |
ADS-B
Company | Comments |
---|---|
![]() |
Products: Ping20S (ADS-B Out) Ping1090 (ADS-B IN/OUT) |
![]() |
All products of the following families: MX XP |
![]() |
Autopilot 1x includes an internal ADS-B transceiver. To know how to configure it, read the Transponder/ADS-B - Devices section of the 1x PDI Builder user manual. |
![]() |
Air Data Sensors
Company | Comments |
---|---|
![]() |
High Speed Pitot Sensor, read the High Speed Pitot Sensor integration example to know how to integrate it with Veronte Autopilot 1x. |
![]() |
OAT 428: For detailed information on its integration with Veronte Autopilot 1x, refer to OAT sensor 428 integration example |
![]() |
Altimeters
Company | Comments |
---|---|
![]() |
I/O: UD-1 (CAN-bus) To know how to integrate it with Veronte Autopilot 1x, read the Ainstein CAN Radar integration example |
![]() |
I/O: CAN-bus |
I/O: I2C and CAN-bus Product: LW20, SF11, SF20 To know how to integrate them with Veronte Autopilot 1x, read the Lightware LW20 Lidar and Lightware SF20 Lidar integration examples |
|
![]() |
I/O: PWM Product: LIDAR-Lite v3 To know how to integrate it with Veronte Autopilot 1x, read the Lidar Garmin Lite v3 integration example |
Cameras
Company | Comments |
---|---|
![]() |
|
![]() |
|
![]() |
|
![]() |
|
![]() |
Autopilot 1x reads identified objects by their cameras. |
Control stations
Company | Comments |
---|---|
![]() |
Products: LCS PCS |
Datalinks
BLOS Communications
Company | Comments |
---|---|
Broadband UAV Satcom: IMS-350 Midband UAV Datalink and GPS System: DLS-100 |
|
![]() |
Satellite Communications: RockBLOCK |
![]() |
|
Requires Veronte COM |
LOS Communications
Company | Comments |
---|---|
![]() |
Antenna: Tracking Systems T28 Radio module:
|
![]() |
I/O: RS232 communication tunnel Microhard radio: pDDL900-ENC, read the Microhard integration example to know how to integrate it with Veronte Autopilot 1x |
![]() |
I/O: RS232 communication tunnel DTC radio: SOL8SDR-C, read the DTC integration example to know how to integrate it with Veronte Autopilot 1x |
![]() |
I/O: RS232 communication tunnel Streamcaster radio: 4200E, read the Silvus integration example to know how to use it with Veronte Autopilot 1x |
![]() |
Radio: To know how to configure Digi radios, read its user guide and read the Digi integration example to know how to integrate it with Veronte Autopilot 1x |
Engines
![]() |
![]() |
![]() |
![]() |
![]() |
Jet Engines
![]() |
![]() |
![]() |
![]() |
Expansion modules
Company | Comments |
---|---|
![]() |
Products: CEX, read the CEX connection integration example to know how to integrate it with Veronte Autopilot 1x. MEX, read the MEX connection integration example to know how to integrate it with Veronte Autopilot 1x. |
GNSS Receivers
Company | Comments |
---|---|
![]() |
GNSS, read the NexNav GNSS integration example to know how to integrate it with Veronte Autopilot 1x. |
![]() |
GNSS: ZED-F9P-02B |
![]() |
|
![]() |
IMUs & Compass
Company | Comments |
---|---|
![]() |
IMU: VN-300 To know how to integrate it with Veronte Autopilot 1x, read the Vectornav VN-300 integration example |
![]() |
IMU: HWT905-232 To know how to integrate it with Veronte Autopilot 1x, read the WitMotion HWT905-232 integration example |
![]() |
Magnetometer: MEX To know how to integrate it with Veronte Autopilot 1x, read the MEX integration example |
![]() |
Magnetometer: HMR2300-232 To know how to integrate it with Veronte Autopilot 1x, read the Magnetometer Honeywell HMR2300 integration example |
![]() |
Magnetometer: RM3100-CB To know how to integrate it with Veronte Autopilot 1x, read the PNI RM3100 integration example |
Motor controllers / ESC
Company | Comments |
---|---|
![]() |
Veronte products: MC110, read the MC110 connection integration example to know how to integrate it with Veronte Autopilot 1x. MC24, read the MC24 connection integration example to know how to integrate it with Veronte Autopilot 1x. MC01, read the MC01 connection integration example to know how to integrate it with Veronte Autopilot 1x. |
![]() |
I/O: PWM |
![]() |
I/O: CAN-bus |
Other Companies | Comments |
---|---|
![]() |
I/O: PWM, RS232, RS485, and CAN-bus |
![]() |
|
![]() |
Power management units
Company | Comments |
---|---|
![]() |
Veronte product: R12S R12F R24F |
![]() |
Transmitters
Company | Comments |
---|---|
![]() |
Products: 8J/10J/12K/14SG with 8 channels 12K/14SG with 12 channels T18SZ with 8 channels |
![]() |
Stick |
© 2025 Embention. All rights reserved.